What do you think about this photo?Do you have questions or curiosities about this image? Do you want to ask something to the author, give him suggestions for improvement, or congratulate for a photo that you really like?
You can do it by joining JuzaPhoto, it is easy and free!
There is more: by registering you can create your personal page, publish photos, receive comments and you can use all the features of JuzaPhoto. With more than 242000 members, there is space for everyone, from the beginner to the professional.
| sent on February 26, 2016 (23:34) | This comment has been automatically translated (show/hide original)
We have the same version of Novoflex, but my army is all green. Abbiamo la stessa versione di Novoflex, però il mio è tutto verde militare. |
| sent on February 27, 2016 (20:05) | This comment has been automatically translated (show/hide original)
Bunasera to you, I own the green stickers to apply. I remember they were costing a lot, but I did become a "toed" Canon, as you may have noticed from the belt. And there is why the telephoto lenses are white: for the dilations in the case of exposures to high temperatures as in the sun. In fact the white color absorbs less heat. It was also written in a book many years ago, published by Canon. My under her dress is black. I think we should establish the club of Juzini Martians pardon novoflexiani. As you may have read in other posts I am looking for a ring to mount on EOS, before I used it with FD attack. You who uses the car body? Greetings. Graziano Bunasera a te, possiedo gli adesivi verdi da applicare. Ricordo che erano costati parecchio, ma l'ho fatto diventare un " biancone " Canon, come forse avrai notato dalla cinghia. E c'e un perchè i teleobbiettivi sono bianchi: per le dilatazioni in caso di esposizioni ad alte temperature come sotto al sole. Infatti il colore bianco assorbe meno calore. Era scritto anche in un libro di molti anni orsono edito da Canon. Il mio sotto il vestito è nero. Credo che dovremmo fondare il club dei Juzini marziani pardon novoflexiani. Come forse avrai letto in altri post sono alla ricerca di un anello per montarlo sulle EOS, prima lo utilizzavo con attacco FD. Tu che corpo macchina usi ? Saluti. Graziano |
| sent on March 01, 2016 (0:35) | This comment has been automatically translated (show/hide original)
Hello Graziano, maybe you did not recognize me, but we exchanged several private message :-D However the use of a Canon 1DsIII, and in total they almost 5 kg wow! Read this page: www.juzaphoto.com/topic2.php?l=it&t=1414229&show=2 Bye Bye, Maurizio Ciao Graziano, forse non mi hai riconosciuto, ma ci siamo scambiati parecchi messaggi privati Comunque lo uso su una Canon 1DsIII, ed in totale fanno quasi 5 kg Leggi questa pagina: www.juzaphoto.com/topic2.php?l=it&t=1414229&show=2 Ciao ciao, Maurizio |
| sent on March 01, 2016 (9:11) | This comment has been automatically translated (show/hide original)
Hello Maurizio, Of course I recognize you, but I did not bore you further. I discovered the Novoflex Italy, which is located in Milan, and they have at home the last CANA ring - AF and should be the right one. Today I carry with me the gun and the body of 2 5 Mark to try and I hope everything works, so I also solved this. The ring is quite expensive, € 58 plus VAT, but I think it absolutely worthwhile. I'll let you know how it went. Thanks for the info, and good day. Graziano. PS: If it appeals to you even read what I told you about TAIR repainted. Buongiorno Maurizio, certo che ti ho riconosciuto, ma non volevo tediarti ulteriormente. Ho scoperto la Novoflex Italia, che si trova a Milano, ed hanno in casa l'ultimo anello CANA - AF e dovrebbe essere quello giusto. Oggi porto con me il cannone ed il corpo della 5 Mark 2 per provare e spero funzioni tutto, così ho risolto anche questo. L'anello è abbastanza caro, € 58 oltre IVA, ma credo ne valga assolutamente la pena. Ti farò sapere com'è andata. Grazie per le informazioni e buona giornata. Graziano. P.S.: se ti aggrada leggi anche cosa ti ho risposto circa il TAIR riverniciato. |
| sent on March 01, 2016 (16:04) | This comment has been automatically translated (show/hide original)
Good afternoon Maurizio, arrival hour from Milan. Disassembled bayonet ring for FD (CANA) and mounted ring for EOS (CANA - EOS). Everything works perfectly. Now I just have to try it. Greetings and thanks. Graziano. Buon pomeriggio Maurizio, arrivo ora da Milano. Smontato anello a baionetta per FD (CANA ) e montato anello per EOS ( CANA - EOS ). Tutto funziona perfettamente. Ora non mi resta che provarlo. Saluti e grazie. Graziano. |
| sent on March 02, 2016 (0:11) | This comment has been automatically translated (show/hide original)
I'm getting half a desire to repaint my Novoflex in military camo ..... One of these days I buy a ring with a microchip, so I I facilitate a little 'life :-D Mi sta venendo una mezza voglia di riverniciare il mio Novoflex in militar camo..... Uno di questi giorni gli compro un anello con microchip, così mi facilito un po' la vita |
| sent on March 02, 2016 (9:04) | This comment has been automatically translated (show/hide original)
Hello Maurizio, Novoflex the ring has no microchip. If you find him show me what you got? As for the idea of ??repainted I'd suggest maybe to buy the adhesive plastic with different camouflage colors and use that. Perhaps the paint can cause harm, I think. Moreover, to facilitate the MAF can not replace the slides? A greeting. Graziano Buongiorno Maurizio, l'anello Novoflex non ha il microchip. Se lo trovi con mi indichi quale hai preso ? Per quanto riguarda l'idea di riverniciarlo ti suggerirei magari di comprare della plastica adesiva con diversi colori camouflage ed utilizzare quella. La vernice forse può causare danni, credo. Inoltre, per facilitare la MAF non si possono sostituire i vetrini ? Un saluto. Graziano |
| sent on March 02, 2016 (9:28) | This comment has been automatically translated (show/hide original)
Hello Maurizio, exist in commerce also the lenscoat for different objectives, are neoprene and costicchiano. I do not think there is the measure for our goals, but looking a little around you can find who manufactures diving suits and camouflage himself to send a piece of proper fit and adapt it with the Velcro, or contact some underwater store or stores carrying articles for airsoft. Greetings. Graziano Buongiorno Maurizio, esistono in commercio anche i lenscoat per diversi obbiettivi, sono in neoprene e costicchiano. Non credo esista la misura per i nostri obbiettivi, ma cercando un poco in giro si può trovare chi confeziona mute da sub mimetiche e farsi mandare un pezzo di misura adeguata e adattarlo con il velcro, oppure rivolgersi a qualche negozio di subacquea o negozi che trattano articoli per il softair. Saluti. Graziano |
| sent on March 02, 2016 (9:59) | This comment has been automatically translated (show/hide original)
Repaint is something much more difficult and delicate, but has a why. Pigriff on the body and on the handles, the original paint is blown in several places, and to be aesthetically bothersome enough .... so the 'basic idea is to put into it in a personalized way. Since it is all metallic, you may be used for bodywork enamels of all types. Anyway it completely smonterei to paint it, so he can treat each piece at best. And then, since I have so much free time, more m 'I mess up and I enjoy :-D :-D :-D The lenscoat and scrolls stickers are the first ones that I looked, but I could not do a good job because the surfaces are too many different profiles,especially on the handles, which are the most damaged. For 'adapter ring I have a different speech from your .... my Novoflex has the' Original Olympus OM attack, so with a simple ring from 15 EUR l 'I mounted on the Canon. Unfortunately my pusher of adapter rings, at that time in the store did not have the version with microchips, so I took what I had just to try it. However, since I'm already using a microchip ring mounted on a Nikon manual tele Ai-S, as is well and helps a lot of the focus, why not try also the cannon? Good day, Maurizio Riverniciare è una cosa molto più impegnativa e delicata, ma ha un suo perchè. Sul corpo del Pigriff e sulle impugnature, la vernice originale è saltata in parecchi punti, ed esteticamente da abbastanza fastidio.... per cui l' idea di base è quella di rimetterlo a nuovo in maniera personalizzata. Dato che è tutto metallico, si possono usare smalti per carrozzeria di tutti i tipi. E comunque lo smonterei completamente per verniciarlo, così da poter trattare ogni pezzo al meglio. E poi, visto che ho tanto tempo libero, più m' incasino e più mi diverto I lenscoat ed i rotoli adesivi sono i primi che ho guardato, ma non riuscirei a fare un bel lavoro perchè le superfici sono con troppi profili diversi, soprattutto sulle impugnature, che sono le più rovinate. Per l' anello adattatore ho un discorso diverso dal tuo.... il mio Novoflex ha l' attacco originale Olympus OM, quindi con un semplice anello da 15 euro l' ho montato sulla Canon. Purtroppo il mio pusher di anelli adattatori, in quel momento in negozio non aveva la versione col microchip, per cui ho preso quello che aveva tanto per provarlo. Però, dato che sto già usando un anello con microchip montato su un tele manuale Nikon Ai-S, visto che va bene e facilita di parecchio la messa a fuoco, perchè non provarci anche col cannone ? Buona giornata, Maurizio |
| sent on March 02, 2016 (10:11) | This comment has been automatically translated (show/hide original)
Hello Maurizio, Blessed you who have little free time. Considering what they tell me, once released from the "body" send me a photo. All figured out for the ring. Now you have me intrippato with camouflage that they are about to buy the camouflage neoprene. to finished work (who knows when) you indeed images. Thanks again and greetings. Graziano. Buongiorno Maurizio, beato tu che hai molto tempo libero. Considerato quello che mi racconti, una volta uscito dalla " carrozzeria " mandami una foto. Capito tutto per l'anello. Adesso mi hai intrippato con il camouflage per cui sono in procinto di acquistare del neoprene mimetico. ad opera finita ( chissà quando ) ti inverò le immagini. Grazie ancora e saluti. Graziano. |
| sent on March 02, 2016 (13:13) | This comment has been automatically translated (show/hide original)
For all I care, "who knows when" I decided :-D Anche per quel che mi riguarda, "chissa quando" mi decido |
|
Publish your advertisement on JuzaPhoto (info) |