What do you think about this photo?Do you have questions or curiosities about this image? Do you want to ask something to the author, give him suggestions for improvement, or congratulate for a photo that you really like?
You can do it by joining JuzaPhoto, it is easy and free!
There is more: by registering you can create your personal page, publish photos, receive comments and you can use all the features of JuzaPhoto. With more than 252000 members, there is space for everyone, from the beginner to the professional.
| sent on July 12, 2016 (20:55) | This comment has been automatically translated (show/hide original)
hello, how you set the camera to use the helios? ciao, come hai impostato la camera per usare l'helios? |
| sent on July 12, 2016 (20:56) | This comment has been automatically translated (show/hide original)
hello, how you set the camera to use the helios? ciao, come hai impostato la fotocamera per usare l'helios? |
| sent on July 12, 2016 (21:10) | This comment has been automatically translated (show/hide original)
f 2.0 at about 3-4 meters from the subject, stabilizer 55mm, if you want to know more, ask. f 2.0 a circa 3/4 metri dal soggetto, stabilizzatore a 55mm, se vuoi sapere altro, chiedi pure. |
| sent on July 15, 2016 (19:59) | This comment has been automatically translated (show/hide original)
Thanks for your, I mean he put on "M" and set the same aperture value that was on the target? I actually placed hurt demand :) I wanted to ask how to use the Helios on OMD :) Grazie per la disponibilità, intendevo dire ha messo su "M" e fissato lo stesso valore di diaframma che era su l'obiettivo? Effettivamente ho posto male la domanda :) Volevo chiedere come si usa l'Helios sulla OMD :) |
| sent on July 16, 2016 (1:15) | This comment has been automatically translated (show/hide original)
No; since the aim is not recognized in practice it goes into manual. I put the machine on A; It sets the aperture on the lens and the machine automatically chooses the time; if the weather does not suit me, I open or close the iris; so basically just focus manually and adjust the iris; it is important to remember to adjust the stabilizer on the lens focal length; if it has only one objective vintage, there are no problems, you rule once for all; so, when you use m43 objectives are adjusted automatically; but if you have various objectives vintage (like me) should be adjusted each time the IS according to the focal "real" target. It 'still harder said than done ;-) No; dato che l'obiettivo non viene riconosciuto, in pratica va in manuale. Io metto la macchina su A; regolo il diaframma sull'obiettivo e la macchina automaticamente sceglie il tempo; se il tempo non mi va bene, apro o chiudo il diaframma; per cui in pratica basta mettere a fuoco manualmente e regolare il diaframma; importante è ricordarsi di regolare lo stabilizzatore sulla focale dell'obiettivo; se si ha un solo obiettivo vintage, non ci sono problemi, si regola una volta per tutte; tanto, quando usi obiettivi m43 si regolano in automatico; se invece hai vari obiettivi vintage (come me) ogni volta va regolato l'IS in base alla focale "reale" dell'obiettivo. E' comunque più complicato dirlo che farlo |
| sent on July 16, 2016 (8:12) | This comment has been automatically translated (show/hide original)
Thank you, clear. In 'the em-10 menu I find only the ability to enable and disable the is. The adjustment mode is when it does not recognize the target?
Thanks again, (a drink I get a Helios 44m-4: cool:) Grazie, chiaro. Nei menu' della em-10 trovo solo la possibilità di attivare e disattivare l'is. La modalità di regolazione si attiva quando non riconosce l'obiettivo? Grazie ancora, (a beve mi arriva un Helios 44m-4 :cool: ) |
| sent on July 16, 2016 (11:33) | This comment has been automatically translated (show/hide original)
That's right, when you mount a lens does m43, pressing the Info button, you can adjust the focal length. Esatto, quando monti un obiettivo non m43, premendo il tasto Info puoi regolare la focale. |
|

Publish your advertisement on JuzaPhoto (info) |