Che cosa ne pensi di questa foto?Hai domande e curiosità su questa immagine? Vuoi chiedere qualcosa all'autore, dargli suggerimenti per migliorare, oppure complimentarti per una foto che ti ha colpito particolarmente?
Puoi farlo iscrivendoti a JuzaPhoto, è semplice e gratuito!
Non solo: iscrivendoti potrai creare una tua pagina personale, pubblicare foto, ricevere commenti e sfruttare tutte le funzionalità di JuzaPhoto. Con oltre 242000 iscritti, c'è spazio per tutti, dal principiante al professionista.
| inviato il 04 Marzo 2013 ore 12:43
Ben riuscito, mi piace anche l'effetto ellisse vicino alla polare. Ottima nache la luce sull'albero. Peccato solo per alche ramo un po' mosso Fabio |
| inviato il 04 Marzo 2013 ore 15:13 | Questo commento è stato tradotto automaticamente (mostra/nascondi originale)
Immagini. Superb image. |
| inviato il 04 Marzo 2013 ore 18:57
wow, che effetto spettacolare. bel lavoro!! |
| inviato il 04 Marzo 2013 ore 19:04
effetto davvero particolare,sembra un vortice ke ti risucchia all'interno! bravo complimenti! |
| inviato il 04 Marzo 2013 ore 19:43 | Questo commento è stato tradotto automaticamente (mostra/nascondi originale)
Colpo Impressionante! Il rispetto per prodution Post!! Bravo! ;-) Impressive shot ! Respect for Post prodution !!!! Bravo ! |
| inviato il 04 Marzo 2013 ore 20:48
bella foto e complimenti per la pazienza |
| inviato il 04 Marzo 2013 ore 23:03
Bellissimo startrail |
| inviato il 04 Marzo 2013 ore 23:32
Che spettacolo,molto bella ciao. |
| inviato il 05 Marzo 2013 ore 1:44
molto bella! :) curiosità da dilettante (sto ordinando giusto ora il mio primo trepiede, quindi fn'ora lunghe esposizioni ciccia...) leggo "150 minutes exposure (300 shots of 30 seconds each)"... che vuol dire? Mi aspettavo un bulb o qualcosa del genere... Di base, qual è la tecnica per questo tipo di foto? Grazie! :) |
| inviato il 05 Marzo 2013 ore 17:42
Questo è davvero un lavorone! Bravissimo! |
| inviato il 05 Marzo 2013 ore 21:20 | Questo commento è stato tradotto automaticamente (mostra/nascondi originale)
Grazie a tutti per i vostri commenti garbati! :-)
@ Guidoz: Beh, ci sono due modi di catturare l'opzione Startrail In primo luogo, si può provare con un solo colpo, facendo una esposizione molto lunga in posizione lampadina. Ma prendendo di 3 ore colpo potrebbe non essere così buono per il sensore ed è molto probabile ottenere una foto sovraesposta farlo. Seconda opzione, e il migliore a mio parere, è quello di prendere diverse immagini, e l'unione di tutti insieme poi in post-produzione. Per raggiungere questo obiettivo, ho impostato la mia macchina fotografica in modalità di scatto continuo, modalità manuale con particolare attenzione alla all'infinito. Ho impostato la velocità a 30 secondi e apro l'obiettivo, per quanto posso, che si trova a 4,5 con il Sigma 8-16. Avrete bisogno, naturalmente, un cavo di scatto, e sarà necessario per bloccarlo in modalità di scatto continuo che porterà la vostra fotocamera di mantenere a scattare foto fino a quando si sblocca il cavo di scatto. Questo è tutto più o meno, buon divertimento! :-D Thank you all for your nice comments ! @ Guidoz: Well, there are two ways of capturing a startrail First option, you can try with only one shot, doing a very long exposure in bulb position. But taking a 3 hours shot might not be so good for your sensor and you will most likely get an overexposed picture doing so. Second option, and the best one in my opinion, is to take several pictures, and merging them all together afterwards in post production. To achieve this, I set my camera in continuous shooting mode, manual mode with a focus on infinity. I set the speed to 30 seconds and I open the lens as much as I can, which is 4.5 with the Sigma 8-16. You'll need of course a cable release, and you will need to lock it in continuous shooting mode which will bring your camera to keep taking pictures until you unlock the cable release. That's it pretty much, enjoy ! |
| inviato il 05 Marzo 2013 ore 23:07
(sorry, in the first place I hadn't realised you were not Italian... and I hate automatic translations... we surely communicate more effectively if we both use English ^_^ ) Thanks for sharing your experience.. it's very interesting. About the bulb mode, I was just indeed wandering how you can calculate the right time not to get it overexposed and my answer was that being the sky mostly black there was not such a risk... but if you have a lit foreground of course it's different (although I also like the startrails with dark foreground, like certain mountain silhouettes against the starred sky). I hadn't thought about problems with the sensor indeed, but it sounds reasonable.. too bad because being quite lazy I would more likely try the bulb method.. just leav th camera do it's job and come back hours later :D As for the postproduction, I'm not sure how you do this (I use almost only LightRoom for developing my raw, so i'm not a PS genius... ), if you could quickly explain it, just to have an idea if it's too long and boring for me or I can try it, it would be very kind of you :) |
| inviato il 06 Marzo 2013 ore 13:37
a dir poco bello.........ciao |
| inviato il 06 Marzo 2013 ore 15:47 | Questo commento è stato tradotto automaticamente (mostra/nascondi originale)
Grazie Roberto! :-)
@ Guidoz: non preoccupatevi di essere pigri, perché entrambi i metodi di lavoro per i più pigri. Bloccando la realease cavo, la fotocamera continua a prendere 30 scatti secondo, fino a sbloccare il pulsante di rilascio del cavo. Così si può lasciare la fotocamera nel vostro giardino, andare all'interno della vostra casa, mentre la fotocamera è in funzione e tornare alla fotocamera quando si pensa che il numero di scatti sarà abbastanza a lungo. Di solito mi sento di raccomandare a circa 200 immagini o più, tenendo presente che le immagini più si prende il meglio sarà, in quanto si ottiene un Startrail più pronunciato!
Per la post-produzione, ci sono alcuni software in grado di unire le immagini per voi. Ci sono diverse opzioni là fuori, a seconda del sistema operativo che si sta utilizzando. Sul mio mac, io uso Starstax, ma ci sono molte altre opzioni disponibili per Windows pure. Basta digitare "Startrail software" su google unnd che dovrebbe impostati. Ma prima che la fusione dei colpi sul software Startrail, ti consiglierei di mettere a punto le immagini in Lightroom per primo. Prendete uno dei vostri 200 scatti + (file RAW), e regolare le impostazioni per farlo sembrare il migliore possibile. È possibile aumentare i parametri per le stelle a brillare un po 'di più. Una volta che avete fatto che per una foto, sincrobuonre l'impostazione per tutti i colpi rimanenti in modo da non farlo 200 volte. Quindi è possibile esportare le immagini sul desktop e avviare il processo di fusione. Buona fortuna e spero che vi divertirete tanto quanto me! :-D Thank you Roberto! @Guidoz: don't worry about being lazy because both methods work for lazy people. By locking the cable realease, the camera will keep taking 30 second shots until you unlock the cable release button. So you can leave your camera in your garden, go inside your house while your camera is working and come back to your camera when you think that the number of shots will be long enough. Normally I would recommend around 200 pictures or more, keeping in mind that the more pictures you take the better it will be, since you will get a more pronounced startrail! For postproduction, there are some softwares which can merge the pictures for you. There are different options out there, depending on the OS you're using. On my mac, I use Starstax, but there are plenty of other options available for Windows as well. Just type "startrail software" on google and that should set you up. But before merging the shots on the startrail software, I would recommend you to fine tune the pictures on Lightroom first. Take one of your 200+ shots (RAW file), and adjust the settings to make it look as good as possible. You can boost the parameters in order the stars to shine a bit more. Once you have done that for one picture, sync your setting for all the remaining shots so you don't have to do it 200 times. Then you can export the pictures to your desktop and start the merging process. Good luck and I hope you'll have fun as much as I do ! |
| inviato il 06 Marzo 2013 ore 22:15
Ciao ho letto il commento molto dettagliato a guidoz. Vorrei cimentarmi in queste foto ma parto da zero. Ho una nikon d 3100 un obiettivo nikon 18.55 e un sigma 10.20.. con questa attrezzatura e'possibile eseguire qs foto? E come va impostata la fotocamera? Manuale? Tempi e aperture? Te ne saro'grato se mi illustri su come iniziare...grazie e ciao |
| inviato il 06 Marzo 2013 ore 22:39
@Roberto: bondjames ha già risposto qualche commento fa: 30 secondi (di solito la massima esposizione senza bulb) e la massima apertura possibile che sulla sua lente è f/4.5. Fuoco manuale all'infinito. Non ha menzionato l'ISO, ma penso che conoscendo la tua macchina metterai qualcosa che non faccia troppo rumore, o vista l'esposizione forse ci si può permettere di mettere ISO 100 (bondjames, puoi chiarire questo?). Penso che puoi comunque fare qualche prova con singole immagini per decidere cosa poi userai. @bondjames: thank you very much! I also use a mac, and i'm going to look for the software and try your technique as soon as I receive the tripod I just ordered.. only 1 question: among the problems with bulb mode (that I still would prefer, at least in theory, as it's one shot only) you mentioned possible damages for sensor.. it does make sense indeed but I was wondering what is the difference among a 2h bulb exposition and 2h of 30sec expositions with a very quick pause (I can guess matter of hundredth of seconds) in between... won't the sensor be anyway exposed for a long time to almost fixed images? Or the difference is that the image is discarded from sensor and reacquired every 30 secs? And just to go more in depth with the bulb option too (I'm going to try both, unless really so dangerous) any idea on how to set the camera/calculate times to avoid overexposition? No need to write everything here, you can just give me some good links :) thanks a lot! :) |
| inviato il 07 Marzo 2013 ore 0:11 | Questo commento è stato tradotto automaticamente (mostra/nascondi originale)
Hii Roberto, il Canon 10-22 lente per perfettamente per la Startrail, basta usare la lunghezza focale 10 millimetri, perché avrete bisogno di un angolo di visuale, che è il più ampio possibile di integrare stelle come il maggior numero possibile nel vostro colpo! Se si dispone di un obiettivo fish-eye, che potrebbe essere ancora migliore, ma a 10mm avrete già ottenere un grande risultato!
Hai ragione Guidoz, ho dimenticato di dire l'impostazione ISO. Questa impostazione può variare a seconda l'oscurità del cielo. Per un'apertura 4.5 e una velocità di 30 secondi del valore, io in genere si imposta tra 800 e 1600 ISO a seconda della luna e il buio totale del cielo. Se si dispone di un 2,8 apertura, allora si potrebbe forse impostare la ISO tra 400 e 800! Aprite il vostro obiettivo, per quanto possibile, impostare la velocità a 30 secondi e provare con diverse sensibilità ISO fino a ottenere il risultato desiderato. Non esitate a spingere verso l'alto l'ISO, perché questo vi permetterà di vedere più stelle nel cielo!
Non ho prove di sensori di ottenere danneggiato a causa di esposizione troppo lungo, ma ho letto su diversi siti web che è meglio avere 200 scatti di 30 secondi invece di un colpo di 100 minuti. Forse perché la luce si accumula nel il sensore se si utilizza una sola esposizione mentre si resetta dopo ogni colpo, se si utilizza veri e propri scatti?
Ecco alcuni link che vi darà ulteriori delucidazioni per quanto riguarda startrails, buon divertimento!
www.jamesvernacotola.com/Resources/How-To-Photograph-Star-Trails/12233 diyphotography.net/your-complete-guide-for-photographing-star-trails www.artinnaturephotography.com/gallery/twilightarticle/ Hii Roberto, the Canon 10-22 lens will for perfectly for the startrail, just use the 10mm focal length because you will need an angle of view which is as wide as possible to incorporate as many stars as possible in your shot! If you have a fisheye lens, that might be even better, but at 10mm you will already get a great result! You're right Guidoz, I forgot to mention the ISO setting. This setting will vary depending on the darkness of the sky. For a 4.5 aperture and a 30 seconds speed value, I would typically set it between 800 ISO and 1600 depending on the moon and the overall darkness of the sky. If you have a 2.8 aperture, then you could maybe set your ISO between 400 and 800! Open your lens as much as possible, set the speed to 30 seconds and just try with different ISO settings until you get the result you want. Don't hesitate to push up the ISO because this will allow you to see more stars in the sky! I have no evidence of sensors getting damaged because of too long exposures but I have read on several websites that it is better to have 200 shots of 30 seconds rather than one shot of 100 minutes. Maybe because the light accumulates in your sensor if you use only one exposure while it resets after each shot if you use separate shots? Here are some links which will give you more insights with respect to startrails, enjoy! www.jamesvernacotola.com/Resources/How-To-Photograph-Star-Trails/12233 diyphotography.net/your-complete-guide-for-photographing-star-trails www.artinnaturephotography.com/gallery/twilightarticle/ |
| inviato il 07 Marzo 2013 ore 1:14
You've been just awesome! :) Now I really want to try this out! |
| inviato il 07 Marzo 2013 ore 7:45
grazie ragazzi......gentilissimi |
| inviato il 22 Marzo 2013 ore 17:54
Great shot! |
|
Metti la tua pubblicità su JuzaPhoto (info) |